Juki LH-3578AGF-7 Double Needle, Needle feed lock-stitch machine with Under-trimmer (Setup on table, motor & stand)

(No reviews yet) Write a Review
$6,696.06 $6,361.26
(You save $334.80)
Condition:
New
Weight:
228.00 LBS
Shipping:
$295.00 (Fixed Shipping Cost)
Juki LH-3578AGF-7 Double Needle, Needle feed lock-stitch machine with Under-trimmer (Setup on table, motor & stand)

* With non-cancelling Prepay Pre-Order estimated availability 65 to 95 days, Subject to Change.

Clicklease Financing Above For Businesses Only
For Additional Financing Options Click Here

 What's Included with Pricing Listed above:

Machine Brand: Juki
Machine Model: LH3578AGF-7
Model Subclass: WBAK135
Needle Gauge: (1/4")
Machine Type: Double Needle, Needle feed,
with auto reverse & under-trimmer

Upgraded Control Panel: CP180A (Adds Speed Control)
Control Box: SC920A
Motor Type: Servo (Juki)
Voltage: 110 (or 220)
Phase: 1
Stand/Legs Type: K (Heavy Duty)
Table Type: Standard
Thread Stand: Included
Metal Under/Drawer (for accessories): Included
_________________________

  • Highly reliable thread-trimming mechanism

    Our direct-acting thread trimmer mechanism, which spreads thread without fail, has been further improved. The thread trimmer trims the needle thread and bobbin thread without fail even when thick thread is used. In addition, the thread trimmer's bobbin thread retaining force has been increased.

  • The best-suited thread tension is achieved according to the sewing specifications Unique to JUKI

    Two different types of thread tension controllers have been developed

    The needle tension controller comes in two different mechanisms according to the type of sewing machine. For the G types, the sewing range has been broadened to produce well-tensed seams even when thick thread is used.

    Wire type and round-hole type needle bar thread guide

    Two different kinds of needle bar thread guides (needle clamps), the wire type and round-hole type, have been developed according to the type of sewing machine. The round-hole type needle bar thread guide has been adopted for the G types which sew materials requiring well-tensed seams. In addition, the G type is provided as standard with the presser foot with guide which is effective for the topstitching process.

  • Material-friendly micro-lifter mechanism 

The presser foot can be lifted by a minute amount by adjusting the eccentric pin located in the presser lifter lever section. When sewing shaggy and elastic fabrics, the load applied to the material is reduced by slightly lifting the presser foot. Materials are handled more easily and are finished without sacrificing the inherent texture of the material.

  • Two selectable new-method oiling mechanisms Unique to JUKI

 ECO-oli method (circulation type)

The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption.

 Clean oil method

The oil dropped from the hook and its surrounding sections into the under-cover is not returned to the oil tank, but only clean oil is supplied to the hook at all times.

*The oiling method can be changed over as desired.

  • Adoption of the direct-drive mechanism enhances energy conservation and workability, and increases the needle's material penetrating force

  • A semi-dry head is now installed in all of the models of the LH-3500A SeriesONLY JUKI

    All models of the LH-3500A Series are provided with a semi-dry head to eliminate staining with oil from the frame (the needle bar part).

  • The "large-hook type" uses a hook 1.8 times larger than standard
    This increase in size reduces the frequency of bobbin-thread changes

    The sewing machine has been designed to eliminate waste time and the operator's stress.

Specifications:

Application G: Jeans and heavy-weight
Max. sewing speed 3,000sti/min
Max. stitch length 5mm (F type: 4mm)
Presser foot 7mm (by hand), 13mm (by knee)
Needle G: DP×5 (#21) #16~#23