Juki DNU-1541-7 Single needle walking foot machine with thread trimmer (Setup with table, motor & Stand)

(No reviews yet) Write a Review
$5,150.00
Condition:
New
Weight:
198.00 LBS
Shipping:
$395.00 (Fixed Shipping Cost)
Juki DNU-1541-7 Single needle walking foot machine with thread trimmer (Setup with table, motor & Stand)

Currently Out of Stock, Give us a Call at 972-243-3522 for Estimated Availability

What's Included with Pricing Above:

Machine Brand: Juki
Machine Model: DNU-1541
 Machine Type: Single needle,
walking foot with under-trimmer

Motor Type: Juki Servo
Motor Model: M51N
Control Box Model: SC922A
Control Panel: CP-180C
Voltage: 110 or 220
Phase: 1
Stand/Legs Type: K (Heavy Duty) 
Table Type: Standard CSM
Thread Stand: Included
110v Mini Magnetic LED Light: Included
 _________________________

* Model DNU-1541-7 is Made in Japan *

  • Excellent sewing capabilities and feed performance

    The alternating vertical movements of the walking foot and presser foot are as large as 6.5mm.
    In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. Thanks to this feature and the adoption of a new method of rectangular feed that prevents needle from fraying, the machine sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering.

  • High-speed performance increases productivity

    The machine delivers increased productivity at sewing speeds as high as 2,500sti/min (DNU-1541, -1541S) or 3,000sti/min (DNU-1541-7).

  • Thread trimming without fail (DNU-1541-7)

    Consisting only of a moving knife and counter knife, the simple and well-balanced thread trimming mechanism is capable of cutting thick thread up to without fail.

  • A helpful automatic reverse feed function is provided as standard

    With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore, if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption.

  • Excellent operability and maintainability

    The stitch length can be easily selected by the stitch dial.
    The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel (φ160mm).
    A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup.
    The machine’s full-open-type top cover design makes adjusting works easier.
    The machine comes with a lubricating mechanism that uses a centralized oil wick. This substantially reduces the time and trouble required for oiling the machine. (Hook : automatic.)
    A walking foot mechanism is built into the machine arm to prevent oil from scattering

  • The area around the needle entry is designed to be easily observed

    Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable.

Specification:

Model nameDNU-1541-7  
Max. sewing speed 3,000sti/min*  
Max. stitch length 9mm (forward / backward)
Needle bar stroke 36mm
Lift of the presser foot By hand: 9mm, By knee: 16mm
Thread take-up Slide type
Amount of alternating vertical movement 1~6.5mm  
Dial for adjustment of alternating
vertical movement
Provided as standard  
Bottom-feed adjusting mechanism Provided as standard  
Hook Horizontal-axis full-rotary double-capacity hook
Needle (at the time of delivery) 135×17 (Nm160) Nm125~Nm180
Thread #30~#5, B46~B138, Nm=60/3~15/3
Pitch changing method By dial
Bobbin thread winder Provided as standard
Knee-lifter mechanism Provided as standard
Safety mechanism Provided as standard    
Lubrication Centralized oil wick lubrication (hook: automatic)
Lubricating oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Distance from needle to machine arm 264mm
Bed size 477mm×178mm
Automatic reverse feed function Provided as standard  
Compressed air and air consumption 0.5MPa (5kgf/cm²), 0.3Nl/min  
Motor output 750W
Power requirement Single-phase 100~120V or 200~240V
 
Weight of the machine head 42.5kg  

*"sti/min" stands for "Stitches per Minute."